PRESS RELEASE

For Immediate Release

 

 

ITOX Launches Dual-Core Product Line

with New ATX and microATX Motherboards

New Products Feature Intel® 945G Express Chipset

               

EAST BRUNSWICK, NJ – October 1, 2005 – ITOX, a leading provider of embedded motherboards, today announced the introduction of its first Intel dual-core products into its long-life product line. The company´s new G7L630-B ATX and G7L330-B microATX motherboards utilize the Intel® 945G Express chipset supported under Intel’s Embedded Architecture program, and accept a wide performance-range of Intel LGA775 packaged processors. This includes the Intel® Pentium® D Processor featuring dual-core architecture, Intel® Pentium® 4 processor supporting Hyper-Threading Technology, Intel® Celeron® D processor and Intel® Celeron® processor.

"Our customers are pressed to continually improve performance and contain manufacturing costs," said Robert Liao, vice president, ITOX Applied Computing. "Intel’s introduction of a dual-core processor line—priced near parity with previous single-core processors—has enabled ITOX to address this market demand. The new ITOX G7L630-B and G7L330-B dual-core motherboards ensure higher performance, while holding costs and power budgets."

Optimized for the Intel® Pentium® D Processor featuring dual-core architecture, the G7L630-B and G7L330-B motherboards retain full-compatibility with the Intel® Pentium® 4 processor, Intel® Celeron® D processor and Intel® Celeron processor.  Maximum performance is leveraged through the use of DDR2 533/667 dual-channel memory, onboard PCI-Express Gigabit Ethernet controller and support for top-of-the-line PCI-Express 16 expansion cards.

Intel dual-core architecture products contain two processor execution units and two 1MB L2 cache memories, enclosed in a single package. This allows the processing units to operate in parallel, similar to a dual-processor system, but with a lower power requirement. Software must be rewritten to achieve maximum performance, but applications written to take advantage of Intel® Pentium® 4 processor hyper-threading are "dual-core ready."

In addition, each new ITOX board is RoHS compliant and utilizes the Intel® 945G Express chipset paired with an Intel® ICH7 I/O controller hub. A single LGA775 socket provides support for specified Intel processors with 1066, 800 or 533 MHz system bus speed, Hyper-Threading, Intel® EM64T, Execute Disable Bit and dual-core Architecture.

G7L630-B Long-Life Motherboard

The G7L630-B ATX form-factor (12" x 9.6") motherboard includes: 1-Gigabit LAN Port, 1-Serial COM Port, 8-USB 2.0 ports, Onboard 18-bit AC´97 Audio (Realtek ALC202A), Onboard Intel® GMA950 Graphics, 4-Serial ATA Interfaces, 1-Ultra ATA 100 Interface, 1-FDD Interface, 4-PCI Slots, 1-PCI Express x16 slot, 1-PCI Express x1 Slot, 8-Digital I/O Lines and up to 4GB DDR2 533/667 dual-channel SDRAM in 4-DDR2 DIMM Sockets.

G7L330-B Long-Life Motherboard

The G7L330-B microATX form-factor (9.6" x 9.6") motherboard includes: 1-Gigabit LAN port, 1-Serial COM port, 8-USB 2.0 ports, 1- IEEE 1394 port, Onboard 18-bit AC´97 Audio (Realtek ALC202A), Onboard Intel® GMA950 Graphics, 4-Serial ATA Interfaces, 1-Ultra ATA 100 Interface, 1-FDD Interface, 4-PCI Slots, 1-PCI Express x16 slot, 1-PCI Express x1 Slot and up to 4GB DDR2 533/667 dual-channel SDRAM in 4-DDR2 DIMM Sockets.

 

Product Availability

Sample units of the ITOX G7L330-B and G7L630-B products will be available mid-November, with production quantities available in the first quarter of 2006.

 

Contact Info.

ITOX (www.itox.com) is a leading developer of applied computing platforms for computer communications, networking, and industrial applications and is an ISO 9001:2000 registered firm. It is a major supplier of embedded motherboards for use in light industrial environments, including voice messaging, medical electronics, industrial control, gaming, security monitoring and ATM/POS systems.  ITOX is affiliated with DFI, a top ten manufacturer of PC and embedded motherboards.

DFI-ITOX is an affiliate member of the Intel® Communications Alliance. The Intel® Communications Alliance is a cooperative community of communications and embedded developers and solutions provider. Member companies are committed to developing modular, standards-based building blocks, platforms, and solutions for the communications and embedded market segments. For more information, please visit www.intel.com/go/ica.

All product names mentioned are trademarks or registered trademarks of their respective companies.

For more information, contact ITOX at sales@itox.com or call 888-200-4869 (732-390-2815 Outside USA) Ext. 6712.

Press Contact: Nancie Frank 732-390-2815, Ext. 6509, nfrank@itox.com.