Featuring:
- 6 Full Length ISA Expansion Slots
- Intel® TX Core Logic Chipset
- On-Board Graphics (Saves a Slot)
- Pin Plug Connectors for Non Standard Cases
- Dynamic IRQ Design
- Watch Dog Timer for Unattended Operation
- All Intel® Pentium® and Clone CPU's supported
Technical Specifications:
PROCESSOR
- Click here for Motherboard vs CPU Table
- Intel® Pentium® Processor with MMX™ technology to 233MHz
- Intel® Pentium® Processor to 200MHz
- Cyrix®/IBM®6x86TM & 6x86LTM to PR166MHz
- AMD-K5 to PR166MHz
- AMD K6 to 300MHz; K6-2 to 266MHz
- IDT C6 to 200MHz
CHIPSET
CACHE MEMORY
- 512KB pipeline burst, direct map write-back cache onboard
SYSTEM MEMORY
- 8MB to 256MB onboard memory
- Two 168-pin DIMM sockets using x64 EDO (60/70ns),
fast page mode (60/70ns), or SDRAM (10/12/13ns), 3.3V
- Four 72-pin SIMM sockets using EDO or fast page mode x32 DRAM, (60/70ns), 5V.
BIOS
- Award BIOS, Windows® 95 Plug and Play compatible.
- Flash EPROM for easy BIOS upgrades. Supports drive and USB functions
ON BOARD GRAPHICS ACCELERATOR
- S3 Trio64V+ Accelerated 64-bit graphics controller
- 1 MB video memory onboard
- Video playback feature
- VESA DDC2B for Plug and Play monitors
ENERGY EFFICIENT DESIGN
- Supports ACPI spec and OS Directed Power Management
- RTC timer to power-on or wake-up the system
- Modem Ring-On.Wake-Up
- System power management supported
- CPU stopped clock control
- Hardware supports SMI green mode
- Microsoft®/Intel® APM 1.2 compliant
- Soft Power supported - ACPI v1.0a specification
DAMAGE FREE INTELLIGENCE (D.F.I.)
- Monitors processor temperature and overheat alarm
- Monitors 5V AND 12V POWER voltages WITH failure alarm
- Automatic processor fan control to save energy, prevent
system overheating and prolong fan life
|
PCI IDE INTERFACE
- Ultra DMA/33 supported (Synchronous DMA mode - data transfer rate up to 33MB/sec.)
- DMA Mode 2 Bus Master IDE (data transfer rate up to 22.2MB/sec.)
- PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to 16.6MB/sec.)
- Bus mastering reduces CPU utilization during disk transfer
- ATAPI CD-ROM supported
INTEGRATED I/O
- Ultra I/O controller
- Two NS 16C550A-compatible high speed UARTs
- One SPP/ECP/EPP parallel port
- Supports 360KB/720KB/1.2MB/1.44MB/2.88MB floppy drives
WATCHDOG TIMER
- 8-step counter (0.5/1/2/4/8/16/32/64 sec.) controlled by the BIOS
PROCESSOR SOCKET
- 321-pin ZIF socket (Socket 7)
- Switching power module supports 2.8V, 2.9V, 3.2V and 3.5V processors
CONNECTORS
- 2 USB (Universal Serial Bus) ports
- 1 connector for IrDA interface
- 2 DB-9 serial ports
- 1 DB-25 parallel port
- 1 15-pin VGA connector
- 2 IDE connectors
- 1 floppy connector
- 1 mini-DIM-6 PS/2 mouse port
- 1 mini-DIM-6 PS/2 keyboard port
- 1 20-pin ATX power supply connector
EXPANSION SLOTS (5-1-1)
- 5 dedicated 16-bit ISA slots
- 1 shared PCI/ISA slot
- 1 dedicated PCI slot
Circuit Board
- 4 layers, ATX form factor
- 12" (30.5cm) x 9.6" ((24.4cm)
This page Updated 01/03/2007
|
ITOX is a trademark of ITOX LLC. DFI is a registered trademark and G486VPC is a trademark of DFI Inc.
All other product names mentioned are trademarks or registered trademarks of their respective
companies. All specifications are subject to change without prior notice. (c) 1999 ITOX, LLC.
|
