G5M150-N06C-G
Intel® 852GM chipset
Mini-ITX board with Intel® Celeron® M 600Mhz Processor on board
PROCESSOR
LFP (Local Flat Panel) LVDS INTERFACE
(CPU and Passive HS Included with motherboard)
• Intel® ULV Celeron® M Processor on-board
• Single- or dual-channel LVDS panel support up to UXGA panel resolution
- Core speed 600MHz
with frequency range from 25MHz to 112MHz (single/dual channel)
- Supports 64-bit host data bus and 32-bit addressing
• Integrated PWM interface for LCD backlight inverter control
CHIPSET
ONBOARD AUDIO FEATURES
• Intel chipset
•
Realtek ALC202A
®
- Intel® 852GM Graphics Memory Controller Hub (GMCH)
•
18-bit stereo full-duplex codec with independent variable sampling rate
•
High quality differential CD input
- Intel® 82801DB I/O Controller Hub (ICH4)
•
True stereo line level outputs
SYSTEM MEMORY
•
S/PDIF-out interface
• Two 184-pin DDR SDRAM DIMM sockets
•
2-channel audio output
• 2.5V unbuffered PC1600 (DDR200) or PC2100 (DDR266)
ONBOARD LAN FEATURES
DDR SDRAM DIMM with ECC support
• Supports 128Mbit, 256Mbit, and 512Mbit technologies providing maximum
• Intel® 82562EM fast ethernet controller
capacity of 1GB with x 16 devices
- Basic 10/100 Client Connection
- IEEE 802.3, 10BASE-T/100BASE-TX compliant physical layer interface
BIOS
- IEEE 802.3u Auto-Negotiation
• Award BIOS
- 48-pin SSOP, 3.3V device
• 4Mbit flash memory
• Intel® 82551QM fast ethernet controller
ENERGY EFFICIENT DESIGN
- Integrated IEEE 802.3 10BASE-T and 100BASE-TX compatible PHY
• Supports ACPI specification and OS Directed Power Management
- Glueless 32-bit PCI master interface
• Supports ACPI STR (Suspend to RAM) function
- Glueless CardBus master interface
• Wake-On-Events include:
- 128 Kbyte Flash interface
- Wake-On-PS/2 Keyboard/Mouse
- Thin BGA 15 mm2 package
- Wake-On-USB Keyboard
IDE INTERFACE
- Wake-On-LAN
• Supports up to UltraDMA 100Mbps hard drives
- Wake-On-Ring
• PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec)
- RTC timer to power-on the system
REAR PANEL I/O PORTS
• System power management supported
• CPU stopped clock control
•
4 USB 2.0/1.1 ports
• Hardware supports SMI green mode
•
2 RJ45 LAN port
• Microsoft® /Intel® APM 1.2 compliant
•
3 DB-9 serial ports
•
1 DB-15 VGA port
• Soft Power supported - ACPI v1.0a specification
•
1 mini-DIN-6 PS/2 mouse port
• AC power failure recovery
•
1 mini-DIN-6 PS/2 keyboard port
DAMAGE FREE INTELLIGENCE
•
3 audio jacks: line-out, line-in and mic-in
•
Monitors CPU/system temperature and overheat alarm
I/O CONNECTORS
•
Monitors 5VSB(V)/VBAT(V)/ ±5V/±12V/CPU(V) voltages and failure alarm
•
Monitors CPU/chassis/2nd fan speed and failure alarm
•
1 connector for 2 additional external USB 2.0/1.1 ports
•
Read back capability that displays temperature, voltage, and fan speed
•
1 connector for LCD brightness control
•
Watchdog timer function
•
1 connector for LVDS LCD panel
•
1 connector for LCD/inverter power
ONBOARD GRAPHICS FEATURES
•
1 front audio connector for line-out and mic-in jacks
•
Up to 64MB of dynamic video memory allocation
•
1 CD-in internal audio connector
•
Display core frequency at 133MHz
•
1 S/PDIF-out connector
•
Render core frequency at 133MHz
•
1 connector for IrDA interface
•
Intel® Dual-Frequency Graphics Technology
•
1 40-pin IDE 1 connector for 3.5" HDD
•
2D graphics engine
•
1 44-pin IDE 2 connector for 2.5" HDD (2.0 pitch)
- Optimized 256-bit BLT engine
•
1 floppy connector (FPC connector type)
- 32-bit alpha blended cursor
•
1 parallel connector
- 8-bit, 16-bit, and 32-bit color
•
1 ATX power supply connectors
• 3D Graphics engine
•
1 Wake-On-LAN connector
- Enhanced Hardware Binning Instruction Set
•
1 Wake-On-Ring connector
- Bi-Cubic Filtering
•
1 chassis open connector
- Linear Gamma Blending for Video Mixer Rendering (VMR)
•
1 front panel connector
- Video Mixer Rendering (VMR)
•
3 fan connectors
- 3D setup and render engine
CABLES
- DirectX and OpenGL pixelization rules
- 266-MegaTexel/sec peak performance
•
1 IDE cable
- 16- and 24-bit Z-buffering and 16- and 24-bit W-buffering
•
1 40-44 IDE cable
- Optimal 3D resolution
•
1 LPT cable
- Double and triple render buffer
•
1 USB cable
• Graphics Power Management
EXPANSION SLOTS
- Dynamic Frequency Switching
• 1 PCI slot for PCI expansion card or Riser Card for 1, 2, or 3 PCI slots
- Memory Self-Refresh During C3
(for low profile PCI card only)
- Intel® Display Power Saving Technology
• 1 mini PCI socket (124-pin)
DISPLAY
COMPATIBILITY
• Dedicated LFP (Local Flat Panel) interface
• PCI 2.2 and AC '97 compliant
- Supports data format up to 24-bpp
CIRCUIT BOARD (PCB)
• Analog display
• 6 layers, Mini-ITX form factor
- 350MHz integrated 24-bit RAMDAC
• 17 cm (6.7") x 17 cm (6.7")
- Pixel resolution up to 1600x1200 at 85Hz and up to 1920x1440 at 60Hz
SAFETY
• UL, cUL, FCC Class B, CE
ITOX is a registered trademark of ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of their respective companies. All
specifications are subject to change without prior notice. © 2006 ITOX, LLC
MA-SD-138-0906
