|
|||||||||||||||||||||||||||||||||||||||
|
| |
|
Features:
· ATX format
Supports Intel® Pentium® 4 Processor or
Intel® Celeron® Processor
· Hyper Threading Technology
· Intel® 875P chipset – 800/533/400 MHz data bus
· On-board LAN
· On-board Audio
· On-board ATA RAID
· 5 PCI slots
· 1 AGP slot 1.5V
· Supports up to 8 USB (2.0)
· Uses HighPoint 372N RAID controller
for RAID 0, 1, 0 +1, and 1.5
· Monitors fan speed, temperature, and power supply
voltages
|
The G4C600-R revision controlled motherboard offers the combination of Intel® Pentium® 4 processor power or Intel® Celeron® processor power (478 pin), with up to five PCI slots, and 1 AGP 1.5V slot. This ATX form factor motherboard has a great combination of on-board audio, on-board LAN, onboard ATA RAID, and up to 8 USB 2.0/1.1 ports.
The G4C600-R features the Intel® 875P chipset on an ATX format motherboard. The 800MHz/ 533MHz/400MHz system data bus provides a seamless user interaction while other industry features include read back capability that displays voltage, fan speed, and temperature monitoring. |
The G4C600-R is produced under strict revision control guidelines to provide an extended product life cycle (2-3 years at minimum). This reduces your long-term costs for system testing, certification, and maintenance. DFI-ITOX motherboards are used in a variety of applications and in many industries including those listed below.
Markets:· ATM machines · POS Terminals · Kiosk · Gaming · Networking · Medical Imaging · Security · Industrial Controls · Voice Recognition · Embedded Integration |
Revision Controlled Motherboard: G4C600-R
|
PROCESSOR (Socket 478-based Intel®) Click here for Motherboard vs CPU Table • Intel® Pentium® 4 Processor with Hyper-Threading Technology – 800/533MHz system data bus • Intel® Pentium® 4 processor (478-pin) – 533/400MHz system data bus • Intel® Pentium® 4 processor (478-pin) – 800MHz system data bus • Intel® Celeron® processor (478-pin) – 400MHz system data bus Click here for Intel® CPU Reference Table CHIPSET • Intel® 875P chipset – Intel® 82875P Memory Controller Hub (MCH) – Intel® 82801ER I/O Controller Hub (ICH5R) SYSTEM MEMORY • Supports dual channel (128-bit wide) memory interface – Each channel supports 2 DIMM sockets • Supports maximum of 4GB system memory • Supports Dynamic mode to optimize system performance • Synchronous operation with processor system bus – PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) with 800MHz FSB CPU (supports PAT mode). DDR333 will run at 320MHz memory frequency when used with 800MHz FSB CPU. – PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU – PC2100 (DDR266) with 400MHz FSB CPU • Supports ECC/non-ECC DIMMs • Supports unbuffered DIMMs Approved ECC Memory BIOS • Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible • Supports DMI 2.0 function • 4Mbit flash memory ENERGY EFFICIENT DESIGN • Supports ACPI specification and OS Directed Power Management • Supports ACPI STR (Suspend to RAM) function • Wake-On-Events include: – Wake-On-PS/2 Keyboard/Mouse – Wake-On-USB Keyboard – Wake-On-Ring (external modem) – Wake-On-LAN – RTC timer to power-on the system • System power management supported • CPU stopped clock control • Microsoft®/Intel® APM 1.2 compliant • Soft Power supported - ACPI v1.0a specification • AC power failure recovery DAMAGE FREE INTELLIGENCE • Monitors CPU/system temperature and overheat alarm • Monitors CPU/1.5V/5VSB/VBAT/3.3V/5V/±12V voltages and failure alarm • Monitors CPU/chassis/2nd fan speed and failure alarm Automatic chassis/second fans on/off control • Read back capability that displays temperature, voltage and fan speed ONBOARD AUDIO FEATURES • 20-bit stereo full-duplex codec with independent variable sampling rate • High quality differential CD input • True stereo line level outputs • S/PDIF-in/out interface • 6-channel audio output
|
ONBOARD LAN FEATURES • Integrated IEEE 802.3, 10BASE-T and 100 BASE-TX compatible PHY • 32-bit PCI master interface • Integrated power management functions • Full duplex support at 10, 100 Mbps • Supports IEEE 802.3u auto-negotiation • Supports wire for management br>ATA RAID (Redundant Array of Inexpensive Disk) • Uses HighPoint 372N RAID controller RAID 0, 1, 0+1, and 1.5 • Two independent IDE channels support 4 hard disk drives (ATA/33, ATA/66, ATA/100, ATA/133 or EIDE) • Supports PIO modes on 0/1/2/3/4, DMA modes 0/1/2 and UDMA modes 0/1/2/3/4/5/6 PCI IDE INTERFACE • Supports ATA/33, ATA/66 and ATA/100 hard drives • PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.) • Bus mastering reduces CPU utilization during disk transfer • Supports ATAPI CD-ROM, LS-120 and ZIP ICH5R SATA IDE/RAID INTERFACE • Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface) • Supports RAID 0 & RAID 1 Click here for Work Instruction for SATA Raid PROCESSOR SOCKET • Socket 478-based Intel® ACCELERATED GRAPHICS PORT (A.G.P.) • Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/sec.) for 3D graphics applications (AGP 2x and 3.3V AGP card are not supported) • Supports AGP 3.0 and AGP 2.0 spec REAR PANEL I/O PORTS • 4 USB 2.0/1.1 ports • 1 RJ45 LAN port • 2 DB-9 serial port • 1 DB-25 parallel port • 1 mini-DIN-6 PS/2 mouse port • 1 mini-DIN-6 PS/2 keyboard port • 3 audio jacks: line-out, line-in and mic-in I/O CONNECTORS • 2 connectors for 4 additional external USB 2.0/1.1 ports • 1 front audio connector for external line-out and mic-in jacks • 1 connector for an external game/MIDI port • 2 internal audio connectors (CD-in and AUX-in) • 1 4-channel audio output connector • 1 S/PDIF-in/out connector • 1 connector for IrDA interface • 2 RAID IDE connectors • 2 Serial ATA connectors • 2 IDE connectors • 1 floppy connector • 2 ATX power supply connectors • 1 Wake-On-LAN connector • 3 fan connectors for CPU fan, system fan, and 2nd fan EXPANSION SLOTS • 1 AGP slot- 1.5V • 5 PCI slots COMPATIBILITY • PCI 2.2 and AC ’97 compliant • Intel® AGP version 3.0 PCB • 4 layers, ATX form factor • 30.5cm (12.05") x 24.4cm (9.6") SAFETY • UL, cUL, FCC Class B, CE
|
|
|
DFI-ITOX LLC., 8 Elkins Road, East Brunswick, NJ 08816 1-888-200-4869 http://www.dfi-itox.com |
DFI-ITOX is a registered trademark of DFI-ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of their respective companies. All specifications are subject to change without notice. 2005 DFI-ITOX, LLC.