G4H875-N-G
Intel® 875P chipset Socket 478-based Intel® ATX board
PROCESSOR (Socket 478-based Intel® )
ONBOARD LAN FEATURES
Intel® Pentium® 4 Processor with Hyper-Threading Technology
- Up to 3.2GHz+ with 512KB and 1GB cache
82547El Gigabit LAN CSA interface
- 533/800MHz system data bus
- Integrated power management functions
Intel® Pentium® 4 processor
- Full duplex support at 10, 100, and 1000 Mbps
- 400/533MHz system data bus
- Supports IEEE 802.3 auto-negotiation
Intel® Celeron® processor
- Supports wire for management
- 400MHz system data bus
82551 QM fast ethernet controller
CHIPSET
- Integrated IEEE 802.3, 10BASE-T and 100BASE-TX compatible PHY
- Glueless 32-bit PCI master interface
Intel® 875P chipset
- Glueless CardBus master interface
- Intel® 82875P Memory Controller Hub (MCH)
- 128Kbyte Flash interface
- Intel® 6300ESB I/O Controller Hub
- Thin BGA 152mm package
SYSTEM MEMORY
PCI IDE INTERFACE
Supports dual channel (128-bit wide) memory interface
Supports ATA/33, ATA/66 and ATA/100 hard drives
- Each channel supports 2 DIMM sockets
PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
Supports maximum of 4GB system memory
Bus mastering reduces CPU utilization during disk transfer
Supports Dynamic mode to optimize system performance
Supports ATAPI CD-ROM, LS-120 and ZIP
Synchronous operation with processor system bus
Serial ATA IDE INTERFACE
- PC2100/PC2700/pc3200 (DDR266/DDR333/DDR400) with
800MHz FSB CPU (supports PAT mode). DDR333 will run at
Supports two SATA (Serial ATA) interfaces which are compliant with
320MHz memory frequency when used with 800MHz FSB CPU
SATA 1.0 specification (1.5Gbps interface)
- PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU
Supports RAID 0 & RAID 1
- PC2100 (DDR266) with 400MHz FSB CPU
ACCELERATED GRAPHICS PORT (A.G.P.)
Supports ECC/non-ECC DIMMs
Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/sec.)
Supports unbuffered DIMMs
for 3D graphics applications
BIOS
(AGP 2x and 3.3V AGP card are not supported)
Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible
REAR PANEL I/O PORTS
4Mbit or 8Mbit flash memory
4 USB 2.0/1.1 ports
Supports optional BIOS Write Protect function by hardware
2 RJ45 LAN port
Supports DMI 2.0 function
2 DB-9 serial port
ENERGY EFFICIENT DESIGN
1 DB-25 parallel port
Supports ACPI specification and OS Directed Power Management
1 mini-DIN-6 PS/2 mouse port
Supports ACPI STR (Suspend to RAM) function
1 mini-DIN-6 PS/2 keyboard port
Wake-On-Events include:
3 audio jacks: line-out, line-in and mic-in
- Wake-On-PS/2 Keyboard/Mouse
CONNECTORS
- Wake-On-USB Keyboard
2 connectors for 2 external serial ports
- Wake-On-Ring (external modem)
1 front audio connector for external line-out and mic-in jacks
- Wake-On-LAN
1 connector for an external game/MIDI port
- RTC timer to power-on the system
2 internal audio connectors (CD-in and AUX-in)
System power management supported
1 connector for IrDA interface
CPU stopped clock control
2 Serial ATA connectors
Microsoft® /Intel® APM 1.2 compliant
2 IDE connectors
Soft Power supported - ACPI v1.0a specification
1 floppy connector
AC power failure recovery
1 opened chassis alarm connector
DAMAGE FREE INTELLIGENCE
2 ATX power supply connectors
Monitors CPU/system temperature and overheat alarm
1 Wake-On-LAN connector
Monitors Vcore/VCC3/±12V/VCC/VBAT/5VSB, voltages, and failure alarm
CPU fan, chassis fan, second fan, and MB fan
Monitors chassis/CPU/MB fan speed and failure alarm
EXPANSION SLOTS
Read back capability that displays temperature, voltage and fan speed
1 AGP slot- 1.5V AGP
CPU Fan Protection function monitors the CPU fan during system boot up
4 PCI slots
CPU Temperature Protection function monitors the CPU temperature
1 PCI-X 64-bit/66MHz slot
during system boot up
COMPATIBILITY
Supports Watchdog Timer Function
PCI 2.2 and AC '97 compliant
ONBOARD AUDIO FEATURES
Intel® AGP version 3.0
18-bit stereo full-duplex codec with independent variable sampling rate
PCB
High quality differential CD input
4 layers, ATX form factor
True stereo line level outputs
30.5cm (12.05") x 24.4cm (9.6")
2-channel audio output
SAFETY
UL, cUL, FCC Class B, CE
ITOX is a registered trademark of ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of their respective companies. All
specifications are subject to change without prior notice. © 2006 ITOX, LLC
MA-SD-133-0706