G4S600-B-G
Intel® 865G chipset
Socket 478-based Intel® ATX board
PROCESSOR (Socket 478-based Intel® )
- 16- and 24-bit Z-buffering and 16- and 24-bit W-buffering
• Intel® Pentium® 4 Processor with Hyper-Threading Technology
- Vertex and programmable pixel fogging and atmospheric effects
- 800MHz/533MHz system data bus
- Double and triple render buffer
• Intel® Pentium® 4 processor
• Software drivers
- 533MHz400MHz system data bus
- Windows® 98SE/2000/ME/XP
• Intel® Celeron® processor
- Windows NT® 4.0
- 400MHz system data bus
ONBOARD AUDIO FEATURES
CHIPSET
• 18-bit stereo full-duplex codec with independent variable sampling rate
• Intel® 865G chipset
• High quality differential CD input
- Intel® 865G Chipset Graphics Memory Controller Hub (GMCH)
• True stereo line level outputs
- Intel® 82801EB I/O Controller Hub (ICH5)
• S/PDIF-out interface
SYSTEM Memory
• 2-channel audio output
• Supports dual channel (128-bit wide) memory interface
ONBOARD LAN FEATURES
- Each channel supports 2 DIMM sockets
• Uses Realtek RTL8101L fast ethernet controller
• Supports up to 4GB system memory
• Integrated IEEE 802.3, 10BASE-T and 100BASE-TX compatible PHY
• Synchronous operation with processor system bus
32-bit PCI master interface
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) with 800MHz FSB CPU
• Integrated power management functions
DDR333 will run at 320MHz memory frequency when used with 800MHz FSB
• Full duplex support at both 10 and 100 Mbps
CPU
• Supports IEEE 802.3u auto-negotiation
- PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU
• Supports wire for management
- PC2100 (DDR266) with 400MHz FSB CPU
PCI IDE INTERFACE
• Supports non-ECC (x64) DIMM using 128Mb, 256Mb, or 512Mb
• Supports unbuffered DIMMs
• Supports ATA/33, ATA/66 and ATA/100 hard drives
BIOS
• PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
• Bus mastering reduces CPU utilization during disk transfer
• Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible
• Supports ATAPI CD-ROM, LS-120 and ZIP
• Supports SCSI sequential boot-up
SATA IDE INTERFACE
• Flash EPROM for easy BIOS upgrades
• Supports DMI 2.0 function
• Supports two SATA (Serial ATA) interfaces which are compliant with
• 4Mbit flash memory
SATA 1.0 specification (1.5Gbps interface)
ENERGY EFFICIENT DESIGN
ACCELERATED GRAPHICS PORT (A.G.P)
• Supports ACPI specification and OS Directed Power Management
• Supports 1.5V AGP 8X (2.13GB/sec) and AGP 4X (1066MB/sec) for 3D graphics
• Supports ACPI STR (Suspend to RAM) function
applications (AGP 2X and 3.3V AGP card are NOT supported)
• Wake-On-Events include:
• Supports AGP 3.0 and AGP 2.0 spec.
- Wake-On-Keyboard/Mouse
REAR PANEL I/O PORTS
- Wake-On-USB Keyboard
• 2 USB 2.0/1.1 ports
- Wake-On-Ring (external modem)
• 1 RJ45 LAN port
- Wake-On-LAN
• 1 DB-9 serial port
- RTC timer to power-on the system
• 1 DB-15 VGA port
• System power management supported
• 1 DB-25 parallel port
• CPU stopped clock control
• 1 mini-DIN-6 PS/2 mouse port
• Microsoft® /Intel® APM 1.2 compliant
• 1 mini-DIN-6 PS/2 keyboard port
• Soft Power supported - ACPI v1.0a specification
• 1 game port
• AC power failure recovery
• 3 audio jacks: line-out, line-in and mic-in
DAMAGE FREE INTELLIGENCE
I/O CONNECTORS
• Monitors CPU/system temperature and overheat alarm
• 3 connectors for 6 additional external USB 2.0/1.1 ports
• Monitors 5VSB(V)/VBAT(V)/1.5V/3.3V/5V/±12V/CPU(V) voltages and
• 1 connector for 1 external serial port
failure alarm
• 1 front audio connector for external line-out and mic-in jacks
• Monitors CPU/chassis/2nd fan speed and failure alarm
• 1 CD-in internal audio connector
• Read back capability that displays temperature, voltage and fan speed
• 1 S/PDIF-out connector (audio digital interface)
• Opened chassis alarm
• 1 connector for IrDA interface
ONBOARD GRAPHICS FEATURES
• 2 Serial ATA, 2 IDE and 1 floppy connectors
• Graphics Memory
• 2 ATX power supply connectors
- Shares 1MB/4MB/8MB/16MB/32MB of the system memory in DOS mode
• 1 Wake-On-LAN connector
- Uses Dynamic Video Memory Technology (DVMT) in Windows mode
• 1 chassis open connector
• Graphics controller
• 3 fan connectors for CPU fan, chassis fan and 2nd fan
- Core frequency of 266MHz
EXPANSION SLOTS
- 350MHz integrated 24-bit RAMDAC
• 1 AGP slot; 1.5V
- Analog display up to 2048x1536 @ 60Hz refresh
• 5 PCI slots
- 3D setup and render engine - Discrete, Triangles, Strips and fans
COMPATIBILITY
- Per pixel perspective corrected texture mapping
- Software DVD at 30fps, full screen
• PCI 2.2 and AC '97 compliant
• 2D graphics features
PCB
- Optimized 256-bit BLT engine
• 4 layers, ATX form factor
- 32-bit alpha blended cursor
• 30.5cm (12.05") x 21cm (8.26")
- Programmable 3-color transparent cursor
SAFETY
• 3D graphics features
• UL, cUL, FCC Class B, CE
- 200 megapixels/sec fill rate
- Maximum 3D resolution: 1600x1200x32 @ 85Hz
- Flat and Gouraud shading
ITOX is a registered trademark of ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of their respective companies. All
specifications are subject to change without prior notice. © 2006 ITOX, LLC
MA-SD-131-0706
