Preliminary
G5C900-B
COM Express Board
PROCESSOR
SERIAL ATA INTERFACE
•
Intel® Core™ Duo/Solo processor
•
Supports two Serial ATA interfaces which are compliant
Intel® Core™2 Duo processor
with SATA 1.0 specification
- 667MHz/533MHz system data bus
• Supports SATA devices with speed up to 1.5Gb/s
•
Intel® Celeron® M processor
- 533MHz system data bus (on Ultra Low Voltage)
IDE INTERFACE
•
Processor socket: mPGA478M
•
Supports up to 2 IDE devices
•
Cooling options
•
Supports up to Ultra ATA 100
- Heatspreader
- Heat sink with cooling fan
DAMAGE FREE INTELLIGENCE
•
Monitors CPU temperature and overheat alarm
CHIPSET
•
Monitors CPU Smart fan speed and failure alarm
•
Intel® chipset
•
Monitors Vcore/1.8V/1.5V voltages and failure alarm
- Intel® 945GME Graphics Memory Controller Hub
(GMCH)
CONNECTORS
- Intel® 82801GB I/O Controller Hub (ICH7M)
• COM Express connectors
SYSTEM MEMORY
- Two 220-pin COM Express standard connectors
•
One 200-pin SODIMM socket (1.8V)
- Module connector pin: Tyco 3-6318490-6
•
Supports up to 2GB DDR2 SDRAM
• 1 CPU fan connector
•
Supports 533MHz and 667MHz DDR2 SDRAM
TEMPERATURE
BIOS
• Operating: 0oC to 60oC
•
SPI interface BIOS (8Mbit)
• Non-operating: -40oC to 85oC
GRAPHICS FEATURES
HUMIDITY
•
Internal graphics features
• Operating: 10% to 90%
- DVMT 3.0 support
- Intel® Dual-Frequency Graphics Technology
POWER
- Intel® Smart 2D Display Technology
• Input: 12V, 5VSB
- Dual Independent display pipes
• Max load power: 130W
- Intel Gen 3.5 Integrated Graphics Engine
•
Integrated graphics interface
REGULATORY
- Analog CRT
• EMC: CE, FCC Part 15 Class B
- Integrated 400MHz RAMDAC
- Analog monitor supports up to UXGA
PCB
- LVDS interface
• Dimensions
- Panel support up to UXGA (1600x1200)
- COM Express basic form factor
- 25MHz-112MHz single/dual channel @ 18bpp, TFT
- 9.5cm (3.74") x 12.5cm (4.9")
panel type support
• Compliance
LAN FEATURES
- PICMG COM Express R1.0 basic form factor, Type 2
•
One Marvell 88E8053 PCI Express Gigabit controller
•
Supports 10Mbps, 100Mbps and 1Gbps data transmission
•
IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps)
compliant
AUDIO FEATURES
•
Supports AC97 digital interface
EXPANSION INTERFACES
•
1 PCI Express x16
•
3 PCI Express x1
•
4 PCI (Master)
Page 1/3
Preliminary
Heatspreader
1
2
4
3
5
Heatspreader on G5C900-B
Bottom View of the Heatspreader
(top view)
• "1" to "5" denote the locations of the thermal pads
designed to contact the corresponding components
that are on G5C900-B.
• Remove the plastic covering from the thermal pads
prior to mounting the heatspreader onto G5C900-B.
Dimensions
Top View
B
B
"A" and "A1" mounting holes
• These mounting holes are used to secure the
heatspreader onto G5C900-B.
• "A" - Use M2.5 screws with minimum length of 3.7 mm.
"A1" - Use M2.5 screws with minimum length of 13 mm.
"B" mounting posts
A
A
• These mounting posts are used to mount the
heatspreader and G5C900-B assembly onto the carrier
A1
A1
board.
• Use M2.5 screws with minimum length of 15 mm.
B
B
B
Side View
Bottom View
Page 2/3
Preliminary
Heat Sink with Cooling Fan
1
3
2
Bottom View of the Heat Sink
Heat Sink with Cooling Fan on G5C900-B
(top view)
• "1" to "3" denote the locations of the thermal pads
designed to contact the corresponding components
that are on G5C900-B.
• Remove the plastic covering from the thermal pads
prior to mounting the heat sink onto G5C900-B.
Dimensions
Top View
A
A
"A" mounting posts
• These mounting posts are used to mount the heat
sink and G5C900-B assembly onto the carrier board.
• Use M2.5 screws with minimum length of 15 mm.
A
A
A
Side View
Bottom View
Page 3/3
All product names mentioned are trademarks or registered trademarks of their respective companies. All specifications are
subject to change without prior notice. © November 19, 2007 ITOX, LLC
