G5G100-P-G
Intel® 915GM chipset
Socket mPGA479M-based Intel® Mini-ITX board
-- High quality texture engine
PROCESSOR (Socket mPGA479M-based Intel® )
- 533MegaTexel/sec performance
• Intel® Pentium® M Processor
- 266 Mpixel/sec fill rate up to 2 bilinear textures
- 533MHz/400MHz system data bus
- Per-pixel perspective corrected texture mapping
• Intel® Celeron® M Processor
-- 3D graphics rendering enhancement
- 400MHz system data bus
- 16- and 24-bit Z buffering
CHIPSET
- Maximum 3D resolution supported: 1600 x 1200 x 32
• Intel® 915GM chipset
ONBOARD AUDIO FEATURES
- Intel® 915GM Graphics Memory Controller Hub (GMCH)
•
Realtek ALC655
- Intel® 82801FBM I/O Controller Hub (ICH6M)
•
16-bit stereo full-duplex codec with independent variable sampling rate
SYSTEM MEMORY
•
High quality differential CD input
•
Two 184-pin DDR SDRAM DIMM sockets
•
True stereo line level outputs
•
Supports single channel (64-pit wide) memory interface
•
S/PDIF-in/out interface
•
PC2700 (DDR333) DDR SDRAM DIMM
•
5.1-channel audio output
•
Supports maximum of 2GB system memory using 256Mbit, 512Mbit, or
ONBOARD LAN FEATURES
1Gbit Technology for x8 and x16 devices, non ECC memory
• RTL8110SC Gigabit Ethernet controller
BIOS
• Supports 10Mbps, 100Mbps, and 1Gps data transmission
• Award BIOS
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
• 4Mbit flash memory
SERIAL ATA INTERFACE
ENERGY EFFICIENT DESIGN
• Supports two Serial ATA interfaces; compliant with SATA 1.0
• Supports ACPI specification and OS Directed Power Management
specification (1.5Gbps interface)
• Supports ACPI STR (Suspend to RAM) function
IDE INTERFACE
• Wake-On-Events include:
• Supports up to UltraDMA 100Mbps hard drives
- Wake-On-PS/2 Keyboard/Mouse
• PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec)
- Wake-On-USB Keyboard
REAR PANEL I/O PORTS
- Wake-On-LAN
•
4 USB 2.0/1.1 ports
- Wake-On-Ring
•
1 RJ45 LAN port
- RTC timer to power-on the system
•
3 DB-9 serial ports
• System power management supported
•
1 DB-15 VGA port
• CPU stopped clock control
•
1 mini-DIN-6 PS/2 mouse port
• Microsoft® /Intel® APM 1.2 compliant
•
1 mini-DIN-6 PS/2 keyboard port
• Soft Power supported - ACPI v1.0b specification
•
3 audio jacks: line-out, line-in and mic-in
• AC power failure recovery
I/O CONNECTORS
DAMAGE FREE INTELLIGENCE
•
2 connectors for 4 additional external USB 2.0/1.1 ports
• Monitors CPU/system temperature and overheat alarm
•
1 connector for 1 external serial port
• Monitors CPU(V)/1.5V/3.3V/5V/12V/-12V/VBAT(V)/5VSB(V) voltages and
•
1 connector for LCD brightness control
failure alarm
•
1 connector for LVDS LCD panel
• Monitors CPU/chassis/2nd fan speed and failure alarm
•
1 connector for LCD AUX power
• Read back capability that displays temperature, voltage, and fan speed
•
1 connector for LCD/inverter power
• Watchdog timer function
•
1 DIO connector
ONBOARD GRAPHICS FEATURES
•
1 front audio connector for line-out and mic-in jacks
• Integrated display interface
•
1 CD-in internal audio connector
- Analog CRT DAC interface support
•
1 S/PDIF-in/out connector
- Supports max DAC frequency up to 400MHz
•
1 connector for IrDA interface
- 24-bit RAMDAC support
•
2 Serial ATA connectors
- Up to 2048x1536 mode support
•
1 40-pin IDE 1 connector
- Digital LVDS interface support
•
1 floppy connector (FPC connector type)
- Integrated dual channel LVDS interface support
•
1 20-pin ATX power connector
- Supports 25 to 112MHz single/dual channel LVDS interface
•
1 chassis open connector
- Single channel LVDS interface support: 1 x 18 bpp
•
1 front panel connector
- Dual channel LVDS interface support: 2 x 18 bpp
•
3 fan connectors
• Internal graphics features
CABLES
- DVMT 3.0 support
• 1 IDE cable
- 1MB or 8MB of pre-allocated memory supported
• 1 SATA cable
- Intel® Dual-Frequency Graphics Technology
• 1 SATA power cable
-- Intel® Smart 2D Display Technology
EXPANSION SLOTS
- Dual Independent display pipes
-- 32-bit hardware cursor supported
• 1 PCI slot for PCI expansion card or Riser Card for 1, 2, or 3 PCI slots
-- 2D graphics engine
(for low profile PCI card only)
- Optimized 256-bit BLT engine
COMPATIBILITY
- 32-bit Alpha blended cursor
• PCI 2.2 and AC '97 compliant
-- High quality 3D setup and render engine
CIRCUIT BOARD (PCB)
- Triangle lists, strips, and fans
• 6 layers, Mini-ITX form factor
- Supports D3D and OGL pixelization rules
• 17 cm (6.7") x 17 cm (6.7")
- Shadow maps
SAFETY
- Zone rendering 2.0 support
• UL, cUL, FCC Class B, CE
ITOX is a registered trademark of ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of their respective companies. All
specifications are subject to change without prior notice. © 2007 ITOX, LLC
MA-SD-150-0707
