G5G330-P-G
Intel® 915GM chipset
Socket mPGA479M-based Intel® microATX board
PCI EXPRESS BASED GRAPHICS INTERFACE
PROCESSOR (Socket mPGA479M-based Intel® )
PCI Express architecture support for external graphics devices
Intel® Pentium® M Processor
One 16-lane PCI Exp port (x16 PCI Exp port) intended for Graphics Attach
- 533MHz/400MHz system data bus
Fully compliant to the PCI Express Base Specification revision 1.0a
Intel® Celeron® M Processor
Base PCI Express frequency support of 2.5Gb/s only
- 400MHz system data bus
PCI Express power management support
CHIPSET
ONBOARD AUDIO FEATURES
Intel® 915GM chipset
Realtek ALC655
- Intel® 915GM Graphics Memory Controller Hub (GMCH)
18-bit stereo full-duplex codec with independent variable sampling rate
- Intel® 82801FBM I/O Controller Hub (ICH6)
High quality differential CD input
SYSTEM MEMORY
True stereo line level outputs
Two 184-pin DDR SDRAM DIMM sockets
S/PDIF-in/out interface
Supports single channel (64-bit wide) memory interface
5.1-channel audio output
Unbuffered PC2700 (DDR333) DDR SDRAM DIMM
ONBOARD LAN FEATURES
Supports maximum of 2GB system memory using 256Mbit, 512Mbit or
RTL8110SB Gigabit ethernet controller
1Gbit technology for x8 and x16 devices, non-ECC memory
Supports 10Mbps, 100Mbps and 1Gbps data transmission
BIOS
IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
Award BIOS
SERIAL ATA INTERFACE
4Mbit flash memory
Supports two Serial ATA interfaces which are compliant with SATA 1.0
ENERGY EFFICIENT DESIGN
specification (1.5Gbps interface)
Supports ACPI specification and OS Directed Power Management
IDE INTERFACE
Supports ACPI STR (Suspend to RAM) function
Supports up to UltraDMA 100Mbps hard drive
Wake-On-Events include:
PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
- Wake-On-Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
IEEE 1394 INTERFACE
- Wake-On-LAN and Wake-On-Ring
VIA VT6307
- RTC timer to power-on the system
Supports two 100/200/400 Mb/sec ports
System power management supported
REAR PANEL I/O PORTS
CPU stopped clock control
1 mini-DIN-6 PS/2 mouse port
Microsoft® /Intel® APM 1.2 compliant
1 mini-DIN-6 PS/2 keyboard port
Soft Power supported - ACPI v1.0a specification
1 DB-25 parallel port
AC power failure recovery
1 DB-9 serial port
DAMAGE FREE INTELLIGENCE
1 DB-15 VGA port
Monitors CPU/system temperature and overheat alarm
1 RJ45 LAN port
Monitors CPU(V)/1.5V/3.3V/5V/12V/-12V/VBAT(V)/5VSB(V)
1 IEEE 1394 port
voltages and failure alarm
4 USB 2.0/1.1 ports
Monitors CPU/system/2nd fan speed and failure alarm
Mic-in, line-in and line-out
Read back capability that displays temperature, voltage, and fan speed
I/O CONNECTORS
Watchdog timer function
2 connectors for 4 additional external USB 2.0/1.1 ports
ONBOARD GRAPHICS FEATURES
3 connectors for 3 external serial ports
Integrated display interface
1 connector for 1 external IEEE 1394 port
- Analog CRT DAC interface support
1 LCD brightness control connector
- Supports max DAC frequency up to 400MHz
1 LVDS LCD panel connector
- 24-bit RAMDAC support
1 LCD/inverter power connector
- Up to 2048x1536 mode support
1 LCD AUX power connector
- Digital LVDS interface support
1 front audio connector for line-out and mic-in jacks
- Integrated dual channel LVDS interface support
1 CD-in internal audio connector
- Supports 25 to 112MHz single/dual channel LVDS interface
1 S/PDIF-in/out connector
- Single channel LVDS interface support: 1 x 18 bpp
1 connector for IrDA interface
- Dual channel LVDS interface support: 2 x 18 bpp
2 Serial ATA connectors
Internal graphics features
1 40-pin IDE connector
- DVMT 3.0 support
1 floppy connector
- 1MB or 8MB of pre-allocated memory supported
1 20-pin ATX power connector
- Intel® Dual-Frequency Graphics Technology
1 front panel connector
- Intel® Smart 2D Display Technology
1 chassis open connector
- Dual Independent display pipes
3 fan connectors
- 32-bit hardware cursor supported
EXPANSION SLOTS
- 2D graphics engine
1 PCI Express x16 slot
- Optimized 256-bit BLT engine
1 PCI Express x1 slot
- 32-bit Alpha blended cursor
2 PCI slots
- High quality 3D setup and render engine
COMPATIBILITY
- Triangle lists, strips and fans
PCI 2.2 and AC ´97 compliant
- Supports D3D and OGL pixelization rules
- Shadow maps
PCB
- Zone rendering 2.0 support
6 layers, micro-ATX form factor
- High quality texture engine
24.4 cm (9.6") x 24.4 cm (9.6")
- 533 MegaTexel/sec performance - 266 Mpixel/sec fill rate up to 2
SAFETY
bilinear textures
UL, cUL, FCC Class B, CE
- Per-pixel perspective corrected texture mapping
- 3D graphics rendering enhancements
- 16- and 24-bit Z buffering
- Maximum 3D resolution supported: 1600x1200x32
ITOX is a registered trademark of ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of their respective companies. All
specications are subject to change without prior notice. © 2006 ITOX, LLC
MA-SD-134-0806