NP905-B16C
Micro COM Express Board
PROCESSOR
EXPANSION INTERFACES
Intel® AtomTM N270 processor
PCI 2.3 interface (supports up to 4 PCI bus masters)
1.6GHz core frequency, 1.10V voltage
Supports 8 USB ports (USB 1.1/2.0 host controllers)
2.5W thermal design power
Supports 3 PCIE x1 interface
512KB on-die second level cache
SERIAL ATA INTERFACE
533-MT/s FSB
SATA interface supports data transfer rate up to 1.5Gb/s
22x22 mm, 1.0 mm ball pitch and 437 balls FCBGA
(150MB/s) per port
Note: processor & Passive HS onboard
Two SATA ports with independent DMA operation sup-
CHIPSET
ported on ports 0 and 2
Intel® chipset
Two-mode operation supports legacy mode using I/O
- Intel® 945GSE Graphics Memory Controller Hub (GMCH)
space or an AHCI mode using memory space
- Intel® 82801GBM I/O Controller Hub (ICH7M)
SATA and PATA can be used in a combined function
mode (When SATA is used with PATA, AHCI mode is not
SYSTEM MEMORY
supported.)
One 200-pin SODIMM socket (1.8V)
Maximum memory supports up to 2GB
IDE INTERFACE
Supports 400MHz and 533MHz DDR2 SDRAM
Bus Master IDE (PATA) controller
Supports up to two IDE devices
BIOS
Ultra ATA 100/66/33
Award BIOS
SPI interface BIOS (8Mbit)
TEMPERATURE
Operating: 0oC to 60oC
GRAPHICS FEATURES
133/166MHz internal graphics core render frequency at
HUMIDITY
1.05V core voltage
Operating: 10% to 90%
One SDVO port (Port B)
POWER
- SDVO slot reversal not supported
Input: 12V, 5VSB, VCC_RTC
Supports 18-bit dual-channel LVDS
Supports CRT resolutions up to SXGA+
REGULATORY
DMI
EMC: CE, FCC Part 15 Class B
DMI lane width - x2 only
PCB
LAN FEATURES
Dimensions
- Micro COM Express form factor
One Realtek RTL8111C PCI Express Gigabit controller
- 9.5cm (3.74") x 9.5cm (3.74")
Supports 10Mbps, 100Mbps and 1Gbps data transmission
Compliance
IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps)
- PICMG COM Express R1.0 basic form factor, Type 2
SAFETY
UL, cUL, FCC Class B, CE
compliant
AUDIO FEATURES
Supports Azalia or AC97 interface (depends on the au-
dio used by the carrier board)
ITOX reserves the right to change the specifications at any time prior to the product's release.
Changes thereafter will be based on the product's revision. Please contact your sales representative for the exact revision offered in your area.
All product names mentioned are trademarks of their respective companies.
© February 9, 2009 ITOX, LLC